Fit Guide
We have designed our motor kit to be compatible with most bikes however, there will be exceptions. use this page to determine if our kit will work on your bike.
Frame requirements
68mm, 73mm, or 100mm threaded bottom bracket shell (PF30/BB30 will work with an adapter). Consult the frame manufacturer’s website for this info, measure it, or contact us for help.
For full suspension bikes, be sure to account for shock travel when determining inner triangle measurement. Do so by releasing all the air from the rear shock then compress it fully to determine how much inner triangle clearance your frame has. If you can fit a water bottle, you likely have room for the battery.
Frames with curved down tubes may require different our extended mounting plates. When ordering a kit, you will be asked what type of frame you have, and we will provide appropriate motor plates to clear your downtube.
Water bottle cage mount on the top of the down tube OR seat tube with min. 13” horizontal and 3” vertical clearance (see above image).